Mold Processing Technology
Mold Processing Technology
Mold Processing Technology
Mold Processing Technology

Mold Processing Technology Claimed

Average Reviews

Photos

Description

The product of our company has a microscopic product plentifully.

Therefore, processing fine a mold and prudent is required.

Grinding grooves 0.05mm

This sample was processed the narrow groove of the groove width 0.05mm by grinding machine.

We realized the processing the heavy-walled narrow groove by grinding processing; it is difficult processing by wire EDM.

It is possible to minimize the corner R by use of the grinding processing.

0.05mm pinhole EDM

This sample has the holes Φ0.05mm in diameter, that were processed by the pinhole EDM.

It is the almost minimum diameter that the small hole EDM can process.

We processed it by use of the electrode 30μm in diameter.

(This electrode was also produced in hakkai.)

Work piece : Thickness of 0.5mm

Material : PD613

Processing method : Pinhole EDM

Depth of hole : 0.5mm(through hole)- 82 Holes.

Wire-cut EDM (wire diameter used: 0.02mm)

This machining sample was processed by the wire-electrical discharge machine with the wire 0.02mm in diameter.

Work piece : Thickness of 0.5mm

Material : PD613

Processing method : Wire-cut EDM

Cut shape : Snow crystal

Size of shape :1.0mm

Author

Related Listings